|
Количество
|
Стоимость
|
||
|
|
|||
CHARX-PROTECT-11-22KW is a surge protection set optimized for use with charging stations. The cable gland specifically selected for this purpose enables the insertion of commercially available H07RN-F cables of 2.5 mm2 to 6 mm2, without restricting the IP protection class.
| IEC test classification | II |
| EN type | T2 |
| Product type | Surge arrester |
| Surge protection fault message | Optical, remote indicator contact |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Indicator/remote signaling | |
| Connection name | Remote fault indicator contact |
| Switching function | Changeover contact |
| Connection method | Push-in connection |
| Conductor cross section solid | 0.5 mm² ... 10 mm² |
| Conductor cross section AWG | 20 ... 8 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 6 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² ... 10 mm² |
| Remote fault indicator contact | |
| Connection method | Push-in connection |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 30 ... 12 |
| Width | 130 mm |
| Height | 180 mm |
| Depth | 111 mm |
| Color | transparent |
| light grey RAL 7035 | |
| Housing material | Polycarbonate |
| Nominal voltage UN | 240/415 V AC (TN-S) |
| 240/415 V AC (TT) | |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous operating voltage UC (L-N) | 275 V AC |
| Maximum continuous operating voltage UC (N-PE) | 260 V AC |
| Residual current IPE | ≤ 5 µA |
| Nominal discharge current In (8/20) µs | 20 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Follow current interrupt rating Ifi (N-PE) | 100 A |
| Short-circuit current rating ISCCR | 25 kA |
| Voltage protection level Up (L-N) | ≤ 1.35 kV |
| Voltage protection level Up (N-PE) | ≤ 1.5 kV |
| Max. backup fuse with V-type through wiring | 32 A (gG - 6 mm²) |
| 35 A (gG - 10 mm²) | |
| 40 A (MCB C - 10 mm²) |
| Ambient conditions | |
| Degree of protection | IP65 |
| Ambient temperature (operation) | -20 °C ... 40 °C |
| Ambient temperature (storage/transport) | -20 °C ... 40 °C |
| Permissible humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Standards/specifications | IEC 61643-11 |
| Standards/specifications | EN 61643-11 |