Quantity
|
Out of stock
|
||
|
Product type | Single relay |
Operating mode | 100% operating factor |
Mechanical service life | 1x 107 cycles |
Insulation characteristics | |
Insulation | Basic insulation |
Insulation characteristics | |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 3 |
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 0.4 W |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 4 kV |
Coil side | |
Nominal input voltage UN | 24 V AC |
Input voltage range | 19.2 V AC ... 34.8 V AC |
Mains frequency | 50/60 Hz |
Typical input current at UN | 31.6 mA |
Typical response time | 3 ms ... 12 ms (depending on phase relation) |
Typical release time range | 2 ms ... 9 ms (depending on phase relation) |
Coil voltage | 24 V AC |
Coil resistance | 350 Ω ±10 % |
Switching | |
Contact type | 1 changeover contact |
Type of switch contact | Single contact |
Drive and function | monostable |
Drive (polarity) | bipolar |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (At 24 mA) |
Limiting continuous current | 16 A |
Maximum inrush current | 30 A (300 ms) |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
58 W (at 48 V DC) | |
48 W (at 60 V DC) | |
50 W (at 110 V DC) | |
80 W (at 220 V DC) | |
4000 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
1.5 A (at 230 V, AC15) |
Connection method | Plug / solder connection |
Dimensional drawing | |
Width | 12.7 mm |
Height | 29 mm |
Depth | 15.7 mm |
Ambient conditions | |
Degree of protection | RT II |
Ambient temperature (operation) | -40 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Standards/regulations | IEC 60664 |
EN 61810-1 |
Mounting type | Plug-in mounting |
Mounting position | any |