Quantity
|
Out of stock
|
||
|
Extension - modular element system for increasing the working length of the tool. S & R Extension SDS-max shank is used with:adapter-connector . In carrying out drilling operations with the help of an adapter, the connector should be lubricated shank tools and extension-connector adapter. When drilling holes deeper than 450 mm by means of modular systems is necessary to perform preliminary small-sized pilot drilling drills to a depth of not less than 150 mm, and then use a long instrument. This will not only protect the instrument from damage, but also increase the speed of drilling, because the impact energy from the power tool is used transmitted to the drill tip with minimal losses. As a result, pilot drilling is fast and accurate, and drilling - the most productive due to minimal symptoms vibration effect and the correct distribution of energy power stroke in the system. When drilling deeper than 450 mm in a horizontal plane and a vertical plane is particularly downwards periodically necessary to carry out the reverse movement along the (partial extension) of the tool from the hole in order to eliminate the slag accumulated in the hole. This will speed up the process of removing the slag from the hole, and hence increase the productivity of the drilling tool.