Quantity
|
Out of stock
|
||
|
Metal drill PRO, DIN338 RN, 135 °, Ø8.0 0018400800100 Alpen
A special series of drills ALPEN PRO (HSS G) with precision grinding, industrial quality for drilling alloyed and non-alloyed steel with a strength limit of ≤1100 N/mm², gray iron, ductile iron, copper alloys, nickel, graphite, composite alloys.
Thanks to their innovations, ALPEN drills are maximally adapted for drilling with hand tools, especially with a battery drive. Since it is almost impossible to perfectly balance a hand tool during the drilling process, the elasticity of the drill protects it from breaking during bending, pinching or incorrect positioning by the operator of the tool itself.
For the best result, it is recommended to use the optimal speed and lubricant and coolant
DIN 338
The maximum hardness of the material is ≤1100 N/mm²
The ALPEN PRO drill is designed for the most effective use with manual drills (including cordless ones)
Suitable for drilling in alloyed and unalloyed steel, hardened steel, gray iron, ductile iron, copper alloys, cupric, graphite, composite alloys.
When working with a cordless tool, the HSS-G drill provides the most efficient use of the battery
ALPEN's proprietary heat treatment ensures elasticity and resistance to breakage
High-quality high-speed steel HSS (high speed steel)
Precessional sharpening does not require centering and high feed force
Industrial use
MADE IN AUSTRIA
Material type: steel; gray cast iron; ductile iron; non-ferrous metals
Multiplicity of drill mm Multiplicity 1.0mm; Threaded M9
HSS Alpen Pro Tool Series (HSS G)
The diameter of the hole is 8 mm
The shank diameter is 8 mm
The working length is 75 mm
The total length is 117
Type of packaging Blister piece
Sharpening angle degrees. 135