Quantity
|
Out of stock
|
||
|
Electric heating controller
These regulators are designed to control the operation of radiators and electric heaters. Mounting options: on the wall or in the cabinet. The controllers turn the load on and off and use pulse width modulation mode. The regulation law (P or PI) is automatically selected.
Technical details:
Supply voltage 200-415 V AC, 50-60 Hz, single or two phase, with automatic switching
Ambient temperature Not more than 30 ° C (note: at full load, the Pulser dissipates 20 watts of heat)
The range of proportional control is 20 K (with sudden fluctuations in temperature)
1.5 K (for slow temperature fluctuations)
Integration time constant 6 min (with sharp fluctuations in temperature)
Pulse repetition period 60 s
Mounting on a DIN rail or in a cabinet
Degree of protection IP30
PULSER / D: IP20
Inputs and outputs
Sensor One main sensor or two main sensors (Pulser-M only)
Setpoint 0-30 ° C (the setpoint range depends on the Regin NTC sensor used)
Nighttime temperature drop 0-10 K
Output (load) 16 A (not less than 1 A), single-phase load not more than 3.6 kW, two-phase not more than 6.4 kW
With automatic switching of supply voltage (230 or 400 V of alternating current)