|
Quantity
|
Out of stock
|
||
|
|
|||
Auger concrete S & R SDS-max VERSIO system used for fast drilling holes in concrete, masonry and natural stone.
Auger S & R VERSIO used with:
- adapter VERSIO
- extension VERSIO
When the drill works must be lubricated shank tool.
When drilling holes deeper than 450 mm using prefabricated systems necessary to perform pre-drilling small length drills to a depth of not less than 150 mm, and then use a long instrument. This will not only protect the instrument from damage, but also increase the speed of drilling, because the impact energy from the power tool is used transmitted to the drill tip with minimal losses. As a result, pilot drilling is fast and accurate, and drilling - the most productive due to minimal symptoms vibration effect and the correct distribution of energy power stroke in the system.
When drilling to a depth of 450 mm in the horizontal plane and a vertical plane is particularly downwards periodically necessary to carry out the reverse movement along the (partial extension) of the tool from the hole in order to eliminate the slag accumulated in the hole. This will speed up the process of removing the slag from the hole, and hence increase the productivity of the drilling tool.