Hybrid reversing starter ELR H5-IES-SC-24DC/500AC-9 2900421 Phoenix Contact €161.70 buy in Kiev, Ukraine. Official partners. Starters

Нome

Сatalog

Electrical equipment

Starters

Hybrid reversing starter ELR H5-IES-SC-24DC/500AC-9 2900421 Phoenix Contact

Нет в наличии

SKU: 2900421

€161.70/pc.

Carriers: New Mail. Courier to the door.

Free delivery of goods Phoenix Contact from 3000 UAH. to the nearest branch of the carrier.

If the Phoenix Contact order is partially shipped, then one part is sent free of charge, the subsequent ones are at the Recipient's expense.

An order consisting of several brands is sent at the expense of the Recipient according to the tariffs of the carriers.

Delivery time depends on the distance to the recipient. Our warehouses: Kiev, Kharkov.

Shipment of goods by bank transfer is carried out after providing the original or scan. copies of the power of attorney with a seal and signature!

Privat 24, through the cash desk or self-service terminal Privatbank.

Cashless payment with VAT (minimum order from 1000 UAH including VAT) or without VAT.

At observance of guarantee certificates (see an exchange and return).

A new review or comment

Rate this item

Send

Features

Brand	Phoenix Contact
Country	Germany
Brief description	Hybrid reversing motor starter 500V AC, 9A 500V AC 9A with 24V DC control voltage, adjustable overload cut-out, emergency stop function according to SIL 3/PL e and screw connection.
Number and type of contacts	3 NO
Switching voltage, V AC	500
Control coil	24 V DC
type starter	Hybrid, Reversible, With motor protection
Switching current, A AC For resistive load (AC-51 or AC-1)	9

Number of phases	3
Motor starter type	Reversing starter
Maximum power dissipation for nominal condition	13.5 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	14.6 W
Minimum power dissipation	1.1 W
Coordination type	1
Supply
Rated control circuit supply voltage U_S	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current I_S	40 mA
Protective circuit	Surge protection
Protective circuit	Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
	Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
Emergency tripping
Operate threshold	> 45 A
Response time	< 2 s

Control
Input name	Control input right/left
Rated actuating voltage U_C	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current I_C	5 mA (Input type 1)
Switching threshold	9.6 V (“0” signal)
Switching threshold	19.2 V (“1” signal)
Switching level	< 5 V DC (For EMERGENCY STOP)
Typical turn-off time	< 30 ms
Protective circuit	Reverse polarity protection

AC output
Rated operating voltage U_e	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current I_e	9 A (AC-51)
Rated operating current I_e	6.5 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	1.5 A ... 9 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min. (for auto reset)
Leakage current	0 mA
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact type	1 changeover contact
Switching capacity in accordance with IEC 60947-5-1	3 A (230 V, AC15)
Switching capacity in accordance with IEC 60947-5-1	2 A (24 V, DC13)

Control circuits
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque	5 lb_f-in. ... 7 lb_f-in.
Load circuit
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque	5 lb_f-in. ... 7 lb_f-in.

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

UKCA
Certificate	UKCA-compliant
ATEX
Identification	 II (2) G [Ex e] [Ex d] [Ex px]
Identification	 II (2) D [Ex t] [Ex p]
Certificate	PTB 07 ATEX 3145
UL approval
Certificate	NLDX.E228652
Safety Integrity Level (SIL, IEC 61508)
Identification	≤ 3
Note	Safe shutdown
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Note	Motor protection
Performance Level (ISO 13849)
Identification	≤ e
Note	Safe shutdown
Category (ISO 13849)
Identification	≤ 3
Note	Safe shutdown
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
SCCR	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	6.5 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
Group installation	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX

Mounting type	DIN rail mounting
Assembly instructions	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)

		Quantity	Out of stock
Total €0.00 Proceed to checkout