Quantity
|
Out of stock
|
||
|
Cases in which you should choose a terneo-mex temperature controller
The thermostat is designed to work with underfloor heating systems based on an electric heating cable or film. It is capable of maintaining temperatures between 10 and 40°C at all times. Uses temperature data from a sensor placed in the floor.
Full control
Turn on the heat whenever you want. Intuitive temperature control using a mechanical knob. The presence of a toggle switch allows you to turn off the thermostat without changing the set temperature level.
Everything needed for installation is included
The standard delivery set includes a thermostat, a temperature sensor with a connecting wire and a decorative frame that will complement any interior. Installation is carried out in a standard socket box with a diameter of 60 mm.
Universal thermostat
The device is compatible with most electrical heating cables and films on the market. Don't limit yourself in choice!
Specifications
Areas of application:
For heated floors, for water heated floors
Control type:
Mechanical
Installation method:
In the socket
Maximum current, A:
16
Minimum temperature, °C:
+10
Maximum temperature, °C:
+40
Maximum load power:
3000 VA
Supply voltage:
230 V ± 10%
Full weight:
0.17 kg ± 10%
Dimensions (W x H x D):
75 x 75 x 43 mm
Internal overall dimensions of the decorative frame:
45 x 45 mm
Temperature sensor:
NTC thermistor 10 kOhm at 25 °C (R10)
Sensor connecting wire length:
3m
Number of commutations under load, not less:
50,000 cycles
Number of commutations without load, not less:
20,000,000 cycles
Temperature hysteresis:
1 °C
Degree of protection according to GOST 14254:
IP20
Contents of delivery:
thermostat, decorative frame, temperature sensor with connecting wire, warranty certificate, warranty card, instructions, technical data sheet, packaging box